309 LSI Stainless Steel Welding Wire – TBL

309 LSI Stainless Steel Welding Wire is used for welding stainless steels with the same chemical composition and for dissimilar welds between stainless steels and C steels.
It has good corrosion resistance and good weldability, thanks to the high Si content and has a low C content.
309 LSI Stainless Steel Welding Wire is also used as a buffer layer for surfacing and welding of AISI 304 plated sheets.

AWS A5.9 ER309LSI
UNS S30988

Description

309 LSI Stainless Steel Welding Wire – TBL

0.03

1.2

0.70

19.0

12.3

2.70

0.15

Typical mechanical properties all weld metal:

Tensile Strength: 580 MPa (85,000 psi)
Yield Strength: 450 MPa (65,000 psi)
Elongation: 37%

309 LSI Stainless Steel Welding Wire – TBL AVAILABLE IN:

Mig Wire Ø 0.80 – 1.00 -1.20 – 1.60

15 kg (plastic or metal spool) DIN 200 (5 kg) DIN 100 (1 kg)

Tig Rods (5-10 kg) Ø 1.00 – 1.20 – 1.60 – 2.00 – 2.40 – 3.20

SAW Wire (25 kg) Ø 2.00 – 2.40 – 3.20

Electrodes Ø 2.00- 2.50 – 3.00 – 4.00 – 5.00

Description

309 LSI Stainless Steel Welding Wire – TBL

C	Mn	Si	Cr	Ni	Mo	Cu
0.03	1.2	0.70	19.0	12.3	2.70	0.15

Typical mechanical properties all weld metal:

Tensile Strength: 580 MPa (85,000 psi)
Yield Strength: 450 MPa (65,000 psi)
Elongation: 37%

309 LSI Stainless Steel Welding Wire – TBL AVAILABLE IN:

Mig Wire Ø 0.80 – 1.00 -1.20 – 1.60
15 kg (plastic or metal spool) DIN 200 (5 kg) DIN 100 (1 kg)
Tig Rods (5-10 kg) Ø 1.00 – 1.20 – 1.60 – 2.00 – 2.40 – 3.20
SAW Wire (25 kg) Ø 2.00 – 2.40 – 3.20
Electrodes Ø 2.00- 2.50 – 3.00 – 4.00 – 5.00

309 LSI Stainless Steel Welding Wire – TBL

309 LSI Stainless Steel Welding Wire – TBL

Description

Description

Contacts

We Are Here